Where to find examples

The STIR documentation is probably not enough to get you going. We therefore have same explicit examples. You can find these as follows

• On GitHub https://github.com/UCL/STIR/tree/master/examples/ (you might need to check the version and switch to the appropriate release)
• If you downloaded the STIR source, in STIR/examples
• If you used conda (or another way to get a pre-compiled version of STIR):
  • since STIR 5.1

  stir_config --examples-dir

• • STIR 5.0 (or a conda version where the above gives the incorrect location)

  stir_config --config-dir

which will report something like C:\Users\kris\miniconda3\envs\stir\Library\share\stir\config. Go 2 folders up and find it in the doc folder, e.g. in my case C:\Users\kris\miniconda3\envs\stir\Library\share\doc\stir-5.1.

In the source, you can also find the ```recon_test_pack```, which could be useful for more advanced users. Note that its scripts and parameter files are not intended as examples, but for testing behaviour.

Please also check the (by now somewhat old but hopefully still useful) STIR-exercises at https://github.com/UCL/STIR-exercises