Installing STIR with CMake: Difference between revisions

From STIR
stir>Mehrhardt85
No edit summary
stir>Krthie
→‎Configuring the STIR build: add warning about shared libraries, some info on RDF, fixed some formatting
Line 158: Line 158:


The ''LLN*'' variables refer to the ECAT LLN library. The ''AVW_ROOT_DIR'' variable refers to the location of the ''AnalyzeAVW'' commercial library. The ''RDF*'' variables refer to a GE proprietary library to read GE PET Raw Data Files. From ''STIR 3.0'' you will also see ''ITK_DIR'' to use the ITK library. If you have any of these, setting these variables appropriately gives you some extra IO capabilities in ''STIR'', but this is optional.
The ''LLN*'' variables refer to the ECAT LLN library. The ''AVW_ROOT_DIR'' variable refers to the location of the ''AnalyzeAVW'' commercial library. The ''RDF*'' variables refer to a GE proprietary library to read GE PET Raw Data Files. From ''STIR 3.0'' you will also see ''ITK_DIR'' to use the ITK library. If you have any of these, setting these variables appropriately gives you some extra IO capabilities in ''STIR'', but this is optional.
The ''RDF*'' variables refer to a proprietary GE library for eading GE RDF files. However, this libary is currently not available so leave these variables as they are.




Line 163: Line 165:


=== Configuration flags ===
=== Configuration flags ===
* ''BUILD_SHARED_LIBS'' can be used to enable shared libraries. However, this curently does *not* work on many systems. See https://github.com/UCL/STIR/issues/6.


* ''BUILD_SWIG_PYTHON'' and ''BUILD_SWIG_MATLAB'' can be set to ON to enable the Python or MATLAB interfaces to STIR. You will need to have [http://swig.org SWIG] installed (and of course Python or MATLAB). For Python,
* ''BUILD_SWIG_PYTHON'' and ''BUILD_SWIG_MATLAB'' can be set to ON to enable the Python or MATLAB interfaces to STIR. You will need to have [http://swig.org SWIG] installed (and of course Python or MATLAB). For Python, any relatively recent version of SWIG should work (although the more recent, the better). For MATLAB, you currently need to build your own version of SWIG based on a fork. See [[Installing the MATLAB interface to STIR]].
any relatively recent version of SWIG should work (although the more recent, the better). For MATLAB, you currently need to build your own version of SWIG based on a fork. See [[Installing the MATLAB interface to STIR]].


* The ''DISABLE_*'' variables allow you to disable some features, even if you have the necessary libraries.
* The ''DISABLE_*'' variables allow you to disable some features, even if you have the necessary libraries.
Line 178: Line 180:


=== Changing optimisation flags ===
=== Changing optimisation flags ===
You might want to change the compiler flags for optimal performance. For example, with GCC, it is probably a  
You might want to change the compiler flags for optimal performance. For example, with GCC, it is probably a good idea to enable the <tt>-Ofast</tt> (from gcc 4.6) and <tt>-march=native</tt> flags. Intel C++ should benefit from the <tt>-fast</tt> flag. You can do this by changing the <tt>CMAKE_CXX_FLAGS_RELEASE</tt> setting. To do this, you will have to toggle ''Advanced Mode'' on.
good idea to enable the <tt>-Ofast</tt> (from gcc 4.6) and <tt>-march=native</tt> flags. Intel C++ should benefit
from the <tt>-fast</tt> flag. You can do this by changing the  
<tt>CMAKE_CXX_FLAGS_RELEASE</tt> setting. To do this, you will have to toggle ''Advanced Mode'' on.


= Stage 3: actual compilation =
= Stage 3: actual compilation =

Revision as of 07:17, 28 April 2016

This page provides instructions on how to install STIR using CMake. You will need STIR 2.2 or later for this to work.

Introduction

CMake is a cross-platform tool for building projects. It allows STIR to have a unique set of files that describe the libraries, tests etc, independent of the platform that you are using.

Building a project with STIR involves three steps: you first need to install some external packages, then run CMake to generate files appropriate to your build system. Then you use your build system to actually do the compilation, testing, installation etc. A build system can be your IDE (e.g. Visual Studio), make on Unix/Linux etc.

You might want to check the CMake help pages for more information. For example,

Step 1: Download/install pre-requisites

More detailed instructions are in the STIR User's Guide, but the following might get you going.

STIR relies on a few external libraries which you need to install first.

  • Boost, a well-respected C++ library which forms the basis for many newer C++ features.
  • python is a scripting language. STIR currently only uses it in some of the SimSET scripts.
  • The ECAT Matrix library from Merence Sibomana and Christian Michel. Only used to read/write data from old CTI PET scanners such as ECAT HR+. You might find this library at a Louvain-la-Neuve university ftp-site. It also comes with GATE.


Unix-type systems

Linux systems use a package management system. Unfortunately, there are many different versions, and the packages have slightly different names. Here is what we know:

debian/Ubuntu or others using APT

apt-get install gcc g++ make  cmake-curses-gui libncurses-dev libx11-dev libboost-dev libpng-dev tcsh python

(prefix with sudo for Ubuntu). If you intend to build the python interface to STIR as well, you will need to add the python-dev package to the above list, and install some other useful packages. For instance

apt-get install swig
apt-get install python-dev ipython python-matplotlib mayavi2

If you will be compiling with MPI support, use

apt-get install mpi-default-dev mpi-default-bin

If you want to use ITK for extra IO capabilities (since STIR 3.0), use

apt-get install libinsighttoolkit4-dev libtiff5-dev

Fedora (and others?) using yum

The following might work when your system uses yum.

sudo yum install gcc gcc-c++ make cmake cmake-gui ncurses-devel  libX11-devel boost boost-devel tcsh python

If this fails, try to issue one "yum install" command for every package.

Arch using pacman

The following might work when your system uses pacman.

$ su
# pacman -Sy gcc make cmake cmake-gui ncurses  libx11 boost boost-libs tcsh python

If this fails, try to issue one "pacman -Ss" command for every package.

Mac OS X

You need the development environment. You would need for instance

It's probably a good idea to install MacPorts. Then you should be able to use the following:

sudo port install boost cmake

Alternatively, you could install extra software manually. See Installing_STIR_with_CMake#Other_systems_or_manual_download.

cygwin on Windows

Use cygwin's setup to install gcc, g++, make, cmake, libncurses-devel, libX11-devel, libboost-devel, tcsh, python.

Other systems or manual download

You can use these also if you don't have super-user permission.

  • Download CMake from http://www.cmake.org and install.
  • Download Boost from http://www.boost.org. Currently, STIR only uses the include files from Boost so you do not need to build the boost libraries, only untar/unzip the boost package. You can put this anywhere you like, as long as you set the BOOST_ROOT flag accordingly (See below).
  • Download SWIG http://www.swig.org if you want to use SWIG to build an interface between STIR and Python. Clearly, you would need Python then as well. For an interface between STIR and MATLAB, you need to compile another version of SWIG for which you can find the details at Installing the MATLAB interface to STIR.

Step 2: Run cmake

Launching CMake

Using the CMake GUI

If you have Windows or MacOSX, CMake comes as an application with a nice GUI. For Unix/linux users, you get that by installing cmake-gui.

After launching it, you first select the source directory (STIR, not STIR/src) and then a build directory. It's recommended to build one level up from STIR. Call it anything you like, e.g. STIR-bin.

On Unix/Linux you will probably be using make to build things. When using make, you want different build directories for every type of build (Debug or Release) you want to make. For systems using an IDE (e.g. Windows with Visual Studio or MacOS with XCode, Linux with eclipse), you can build different versions from one CMake build directory.

From a terminal window

On Unix/linux, cygwin or MacOSX, you can also launch CMake from a terminal window. In that case, you will have to use a slightly more basic user interface. You would launch this as follows.

cd /wherever/it/is/STIR
cd ..
mkdir STIR-bin
cd STIR-bin
mkdir Release
cd Release
ccmake ../../STIR

If you want to use a non-default compiler, please check the CMake FAQ on how to use a different compiler.

Special cases for Windows

In some very special cases, you will need to let CMake find non-standard libraries or executables. Most people will not need this, but if you do, please check Using CMake on Windows with special requirements.

Configuring the STIR build

Once CMake has started, you have to press the 'Configure' button (or c key). CMake might ask you for the "generator" to use. This will determine which compiler you will use for building STIR. Normally the default choice is fine, but you could for instance select Eclipse from here if you have it. On Windows with Visual Studio, you can use this to select if you are going to build STIR with the 32-bit of 64-bit compilers. (Normally both options are fine, unless you want to use specific external libraries).

Then CMake will try to find out as much as it can about your set-up. For instance, it will check if your C++ compiler works properly, if you have X windows (and the curses library installed), if you have the boost C++ library etc.

You might get a "help" screen with some information, which you'll need to close (after reading the information of course). For example, if some required libraries are missing, it will tell you. e.g. saying that FindBoost.cmake cannot find boost and that you need to set the BOOST_ROOT variable. You then get back to a screen with the configuration variables, where you can adjust things. For example, if you installed boost somewhere where CMake didn't find it, you can edit its location there (set BOOST_ROOT to where you extracted boost. If you don't see the BOOST_ROOT variable, toggle Advanced Mode on).


Most of the variables should be fine, except possibly for the following:

  • When you don't use an IDE such as Visual Studio/Eclipse/XCode, you will probably want to set CMAKE_BUILD_TYPE to Release (otherwise STIR will be very slow).
  • By default, CMake will tell your build system to install STIR in a location for system-wide access (e.g. /usr/local or c:\Program Files). If you don't have administrator permissions, you should change this location by adjusting CMAKE_INSTALL_PREFIX.

If you change one of the variables, you will have to configure again. For example, on my Linux system, the variables end up to something like this (where the CURSES variables where set by CMake)

 AVW_ROOT_DIR                                                                  
 BOOST_ROOT                                                                    
 BUILD_SHARED_LIBS                OFF
 BUILD_SWIG_PYTHON                OFF                                      
 BUILD_SWIG_MATLAB                OFF                                      
 CMAKE_BUILD_TYPE                 Release
 CMAKE_INSTALL_PREFIX             /home/kris/                
 CURSES_CURSES_H_PATH             /usr/include                                 
 CURSES_FORM_LIBRARY              /usr/lib/libform.so                          
 CURSES_HAVE_CURSES_H             /usr/include/curses.h                        
 DISABLE_AVW                      OFF                                          
 DISABLE_LLN_MATRIX               OFF                                          
 DISABLE_RDF                      OFF                         
 DISABLE_STIR_LOCAL               OFF                          
 GRAPHICS                         X                                            
 LLN_INCLUDE_DIRS                 /home/kris/devel/lln/ecat                    
 LLN_LIBRARIES                    /home/kris/devel/lln/ecat/debuggcc_64/libecat.a
 RDF_INCLUDE_DIRS                 RDF_INCLUDE_DIRS-NOTFOUND                    
 RDF_LIBRARIES                    RDF_LIBRARIES-NOTFOUND                       
 STIR_LOCAL                       /home/kris/devel/STIR/local        
 STIR_MPI                         OFF
 STIR_OPENMP                      OFF                                          

A lot of these were set by CMake itself. Each variable has a one-line help message (which you can see by hovering over it in the CMake GUI, or by moving the cursor to the line with the variable in ccmake). See the next section for some info on STIR specific variables.

The LLN* variables refer to the ECAT LLN library. The AVW_ROOT_DIR variable refers to the location of the AnalyzeAVW commercial library. The RDF* variables refer to a GE proprietary library to read GE PET Raw Data Files. From STIR 3.0 you will also see ITK_DIR to use the ITK library. If you have any of these, setting these variables appropriately gives you some extra IO capabilities in STIR, but this is optional.

The RDF* variables refer to a proprietary GE library for eading GE RDF files. However, this libary is currently not available so leave these variables as they are.


Once you are happy, you have to press generate. After this, you can quit CMake.

Configuration flags

  • BUILD_SWIG_PYTHON and BUILD_SWIG_MATLAB can be set to ON to enable the Python or MATLAB interfaces to STIR. You will need to have SWIG installed (and of course Python or MATLAB). For Python, any relatively recent version of SWIG should work (although the more recent, the better). For MATLAB, you currently need to build your own version of SWIG based on a fork. See Installing the MATLAB interface to STIR.
  • The DISABLE_* variables allow you to disable some features, even if you have the necessary libraries.
  • GRAPHICS can be set to specify the type of graphics output. See the STIR User's Guide.
  • STIR_MPI switches on the use of the MPI library for reconstruction. This will then look for MPI libraries on your system. See the STIR User's guide for how to run executables compiled with MPI.
  • STIR_OPENMP switches on the use of OPENMP reconstruction. This will then look for OPENMP libraries on your system if necessary. This is not yet recommended for STIR 3.0 or earlier.
  • STIR_LOCAL can be used to extend STIR with your own files. This is described in the STIR developer's guide.

Changing optimisation flags

You might want to change the compiler flags for optimal performance. For example, with GCC, it is probably a good idea to enable the -Ofast (from gcc 4.6) and -march=native flags. Intel C++ should benefit from the -fast flag. You can do this by changing the CMAKE_CXX_FLAGS_RELEASE setting. To do this, you will have to toggle Advanced Mode on.

Stage 3: actual compilation

The previous step used CMake to generate files for the build system appropriate for your OS. Now, you need to use the build system to compile STIR. We list the most common ones:

Unix-type systems: make

CMake will have created a series of directories in STIR-bin with a series of Makefiles. To build STIR, you just type

make

If there are compilation problems, you might want to see the compilation commands:

make VERBOSE=1

Run the tests (see also next section).

make test

You would normally finish with

make install

Visual Studio/XCode and other systems with an IDE for compilation

CMake will have created a series of directories in the build directory with the necessary projects files. For example, for Visual studio, there will be a STIR.sln with targets ALL_BUILD, INSTALL, RUN_TESTS (and projects for every for every library and executable). You would open the STIR solution, and build the relevant target. Remember to set the type of build (Release or Debug) first from your GUI.

Windows using msbuild

If you have chosen Visual Studio output, you can build via the IDE as above. However, you can also use MSBuild. This would for instance be a good choice if you want to use the Windows SDK compilers (as opposed to normal Visual Studio). This could go as follows

  • open a command prompt with the path set for your build environment
  • cd to the location where you instructed CMake to generate the build files
  • you can build a single project or the whole solution, e.g.
    • build all targets in Debug mode
MSBuild ALL_BUILD.vcxproj /p:Configuration=Debug
    • run the tests in Debug mode (see also next section)
MSBuild RUN_TESTS.vcxproj /p:Configuration=Debug
    • install all targets (compiled in Release mode)
MSBuild INSTALL.vcxproj /p:Configuration=Release

Build from command line using CMake

Independent of what generator you used, variations on the following should work from a command prompt

cmake --build . --target ALL_BUILD --config Release

Stage 4: testing via the build system

The previous step used CMake to generate files for the build system appropriate for your OS. As already indicated there, you should use the build system to test STIR. We list the 2 most common (?) cases:

Unix-type systems: make

Still in the build directory, you type

make test

(Note that the Makefiles generated by cmake have test as an independent target, not depending on all. Therefore, if you change the source code, you need to make first, before doing make test.)

If one of the tests fails, you can normally find a log in Testing/Temporary/LastTest.log. You should check this out, and if you're stuck, post it to the stir-users mailing list.

If you want to run only a single test, you can do that as follows

ctest -R name

You can use regular expressions to match the names of any test you want to run. Further options and more details can be found at [1].

Windows and other systems with an IDE for compilation

As in the previous section, there should be a RUN_TESTS target available via your GUI. You should build that one. (Or you can build and run any of the test_* targets if you want to run only a single test).

You can also open a command prompt on your system, change directory to where you built STIR and use for instance

ctest -C Debug -R test_Array

if you have built the Debug version of STIR and want to execute the test_Array test only. Note that this will only work if ctest is in your path, otherwise you have to specify its location.

Stage 5: Using the recon_test_pack

Don't forget to download the recon_test_pack from the STIR web-site, unpack it, and read its README.txt. Note that running these tests will be easier if you first install STIR. You can then pass the installation directory as an argument to the test scripts (or batch files).

Optional: install STIR+MATLAB interface

These are instructions on how to install the STIR+MATLAB interface tested on a unix system with ubuntu 14.04. It relies on CmakeGui (as usual) and an extension of SWIG that has to be installed first.

Install SWIG

First, prepare your system with some packages

 sudo apt-get install libtool automake autoconf autogen bison 

Get the edited version of SWIG

 mkdir swig
 cd swig
 git clone https://github.com/KrisThielemans/swig.git swig_git 

and checkout the right branch

 cd swig_git	
 git checkout KTFIX 

SWIG can now be installed

 ./autogen.sh	
 cd ..
 mkdir build
 cd build	
 ../swig_git/configure	
 make
 sudo make install 

Note that the install might fail at the end if it can't find yodl2man, but we don't care. Check with that we now have the right version (should say 3.0.3)

 swig -version 

Install STIR

Follow the instructions on this page up to the point where you started cmake-gui.

  • press configure
  • press ok
  • set CMAKE_BUILD_TYPE to Release
  • enable BUILD_SWIG_MATLAB
  • enable STIR_OPENMP
  • press configure

check that CMake found the correct SWIG file (not the system one). If it did, replace the SWIG variable and "configure" again

  • generate
  • close cmake-gui

Then either install STIR as usual

 make    
 sudo make install 

or you could build only the STIR+MATLAB first (just to see if it fails or not)

 make stirMATLAB 

Add path in MATLAB. E.g.

 addpath /usr/local/matlab 

Testing

There are a few tests in UCL-STIR/src/swig/test/matlab. Just execute these adding the directory where you installed it to your matlab path (e.g. if you choose /usr/local as your CMAKE_INSTALL_PREFIX, in MATLAB do "addpath /usr/local/matlab")

Content license

All content on this wiki uses the Creative Commons Attribution-ShareAlike 3.0 Unported License File:CreativeCommons-BY-SA-Logo.png